Eze-Kote

Laminating and finishing resin for balsa and foam modelsis a 1-part water based foam safe, low odour, resin alternative to epoxy.  Brush onto balsa and light glass cloth to create a tough, ding and fuel resistant film that can be sanded easily and painted after 15-20 mins. Coverage: 75ml covers approx 1m2 /coat.  

500ml pack

Video link

Download Instructions for using glass cloth and Eze–Kote. (Word document)

Flexikote

A two-part fuel resistant lacquer which dries flexible and is more tolerant to paints. Ideal for covering films and fabrics. Use to seal edges of covering fabrics. Can be used directly onto foam with or without glass cloth. 150ml bottle.

Aerokote

A two-part highly fuel resistant lacquer for the protection of cellulose, enamel, and nitrate dope finishes. Touch dry in 5-10 minutes resulting in dust free finish. Gloss or semi-matt finishes are achieved by mixing the two. Hides surface blemishes. Always test before on unknown paints. Brush thin coats consistently across area. Allow 6 hours before recoating. Wash brushes with cellulose thinners.

100ml bottle with catalyst.

Model Lite

Strong lightweight filler which sands easily. Use only where a strong joint is not required. Use for grain filling by applying with plastic sponge. Bonds wood, foam, fibreglass. White or balsa tint for use in aeromodelling under clear covering film.
Ideal for enhancing model rail scenic layouts eg creating ploughed fields.

250ml pack.

Microballoons

Lightweight “free flowing” white powder which is mixed with polyester or epoxy resin to make an easy sanding strong filler. Use to create snow effects with Scatter-Grip glue.

250ml bottle.

Epoxy Wing Joining Kit

Laminating epoxy and glass cloth in kit form and sufficient quantity to join a set of wings.

45g kit.

ARTF Glue Kit

Selection of the perfect glues for construction of ARTF model aircraft. Includes: 4minute, 20minute, Speed Epoxy and Roket Rapid Cyano, adhesive guide, anti clog glue tip, glue chart for beginners and hints and tips.

Lightweight Fibreglass Cloth

For laminating. Unique fabric finish to better “wetting out” and strength. Available in 37g/sq m and 52 g/sq m (1sq metre) and 28g/sq m (2sq metre packs). Use with Aeropoxy or Polyester finishing resin.

Aeropoxy

Super thin epoxy for laminating and moulding. Use with lightweight glass cloth to add strength and toughness to models. 300g pack.